Ever had dealings with Pump Stations? You must know about this
It's time to talk BENCHING! 📣
And this is a BIG ONE!! 💥
Everyone knows the most common failure with a pumping station is pump blockage. ⚠⚠
But did you know?
The most common reason for pumps blocking is due to poor wet well design❗️ ✏
Angled benching is designed to direct everything that enters the chamber towards the pump inlets 🌀
Without it, dead areas form allowing solids to build up. When a solids mass then breaks away and moves towards the pump, the pumps block 🛠️
It's quite simple but it causes the biggest problems.
If you would like more detailed information on the benching angles and standard drawings - just email us at firstname.lastname@example.org
Or follow us on LinkedIn for more insights https://www.linkedin.com/company/paradigmsystems